Standards & Certifications

mira Low Dust

Dry mixes contain cement and other very fine components that tend to be easily released into the air. This is the case when pouring the dry mixes from the bag into the mixing vessel, during mixing and when handling empty bags. The dust released into the air remains there for a long time, making the work environment unpleasant and dirty.

Many mira tile adhesives and floor levelling compounds are produced using so-called Low Dust technology, i.e. the adhesives are low dust. This way we can make your working environment cleaner and more pleasant. All mixtures produced using Low Dust technology are also clearly marked with the corresponding emblem.

EC 1 Emicode

A clean indoor climate is good for your health! The cleanliness of indoor air is important, and should be keep in mind when choosing a floor covering, glue, levelling compound or other building material. If you want the best, always prefer EMICODE® EC1PLUS quality products.

 

EMICODE® is a control system, one that recognizes modern, solvent-free and low-emission building materials.

 

Products in the ‘very low emission’ class and bearing the EC1PLUS mark ensure the cleanest and healthiest indoor climate possible.

Many mira tile adhesives and floor levelling compounds are produced using so-called Low Dust technology, i.e. the adhesives are low dust. This way we can make your working environment cleaner and more pleasant. All mixtures produced using Low Dust technology are also clearly marked with the corresponding emblem.

M1 certificate

The M1 label is an optional emission class label in Finland. Products labelled as M1 comply with the requirements of emission class M1. Emissions are considered to be the release of harmful volatile substances from the surface of the product during use and operation.

Products are divided into three classes, of which M1 is the highest possible. Class M1 products do not emit harmful airborne substances and odours, or only emit them in very small quantities.

Many mira tile adhesives and floor levelling compounds are produced using so-called Low Dust technology, i.e. the adhesives are low dust. This way we can make your working environment cleaner and more pleasant. All mixtures produced using Low Dust technology are also clearly marked with the corresponding emblem.

ETAG 022

mira waterproofing systems have been awarded the European Technical Assessment ETA. The performance of the entire product set has been tested and is guaranteed.

The estimated useful life of the systems is a minimum of 25 years. The certificate indicates the consistent quality of the product/system. Without a certificate, there is no right to the CE marking for waterproofing.