7360 tile sealer

Neutral impregnator
Neutral impregnator makes the tiles dust and sludge repellent. For cement based grout fillings and absorbent tiles like unpolished natural stone (marble, granite, dolomite). Penetrates the substrate and makes it dirt, lime and liquid repellent.

Detailed description


Thin liquid surface protection that penetrates the absorbent substrate and provides dirt repelling surface without altering the appearance of the surface. However, some natural stones may get some depth colour. The surface treatment is repellent to dirt, liquids such as coffee etc. Waste should be removed immediately to prevent drying into the surface.


Product description

Easy-flowing surface protector.


Application areas

Neutral impregnation for tiles.


Application areas

Used on joints, absorbent tiles and unpolished natural stones, such as marble, granite, slate, limestone, terracotta etc.


Pre-treatment of substrate

The surface must be clean, dry, free of dirt, oil, wax or other surface treatment. Cleaning and grouting must be carried out min. 2 days before surface treatment is started.



7360 tile sealer is applied onto the surface with a viscose cloth or roller. It is important that 7360 tile sealer is distributed evenly onto the entire surface.
Apply in multiple directions to avoid (running) stribes. For highly absorbent surfaces, plenty of 7360 tile sealer must be applied, as subsequent finishing is not possible. After application, any excess 7360 tile sealer should be removed with cloth or the like after 5-10 minutes.

Tools must be cleaned immediately after use with water.

It is recommended to perform a test on a smaller area before treating the entire surface.

During the application, surface gets a wet appearance which dries up within 2-3 days.

Subsequent daily cleaning with 7230 ceramic wash.


Working environment

Product is not subject to REACH registration (EU) 1272/2008. Normal safety conditions for handling chemical substances must be followed.
Reference to product safety data sheet.



0.5 l plastic bottle.


Storage and transportation

Transport and store frost free and chilly. Product will maintain technical specifications minimum 3 years from production date in unopened packing and can be used herafter.


Diluting Ratio
Application Instructions

The substrate must be clean and dry, it must not have any other surface protection products on it.

  1. Apply to the substrate with a viscous cloth or a roller. The product is applied to the substrate in a smooth layer using strokes in different directions to avoid stripes.
  2. After coating the surface, excess product should be removed with a fabric cloth in 5-10 min.
  3. During application, surface can seem wet for the first 2 - 3 days, after which it dries out.

Some types of natural stone can change colour, it is recommended to have a test patch on a small and hidden area first.


Working Time and Temperature

Working temperature:

Setting time: 4-6 h

Dimensions and packaging

0,5 l bottle


7360 tile sealer DS
Technical Data Sheet
7360 tile sealer SDS
Safety Data Sheet
Cleaning Agents Brochure

Packaging Details

ImageProductEANCodeX (mm)Y (mm)Z (mm)Neto Weight (kg)Bruto Weight (kg)Best Before (Days)
mira 7360 tile sealer, 0,5 l570191473601050901088530000.50.61080