supercolour excellent

supercolour excellent

EN 13888 CG2 WA
Cement based polymer reinforced rapidly hardening grout for walls and floors in dry and wet rooms
Rapidly hardening
Suitable for ceramic tiles, natural stone and glass mosaic
Especially suitable for nonabsorbent tiles
Minimal risk of colour change

Detailed description


supercolour excellent gives a dense and compact grouted joint with minimal risk for bacteria penetration and discolouration of grouted joints. The hardened grout withstands daily cleaning without colour off-set and therefore is recommended for wet rooms.

supercolour excellent is a dry product which is ready to use after mixing with water. The grout is easy to work with and the joint is easily filled.


Product description

Cement based, rapid hardening, polymer strengthened, flexible, frostsafe and water resistant grout in power form.


Application areas

For grouting of tiles/ceramic clinker on floors and walls, indoors and outdoors, in wet and dry areas. Can be used outdoors on facades.

Risk of bacteria penetration in dense and compact grout through capillary absorption is minimal. The hardened grout withstands heavy loads and intensive cleaning. supercolour excellent is therefore recommended in wetrooms.

Joint width 2-10 mm.


Tile types

supercolour excellent can be applied to all types of ceramic tiles and natural stones. Particularly suitable for slightly non- absorbent tiles and impermeable materials.


Pre-treatment of substate

Joints and tiles must be clean, free from dust, oil, dirt, grease, and the like.



Mix 5 kg power with approx. 1.3-1.4 litres clean water. Use glue mixer or slow revolving hand drilling machine in order to avoid mixing air into grout. Make sure that powder and water are within the recommended working temperature. Mix 2-3 minutes to a lumpfree mixture. The grout is now ready to use and can be applied in 30-45 min. after mixing.

Apply grout throughly into joint with rubber spatula or grou- ting trowel which is drawn diagonally over the joints. When the grout in the joint is surface-dry but still workable, the excess grout on tiles shall be lossened with a moistened padmaster/sponge. The tiles surface is then cleaned with hard wringed sponge/Wash Boy and joints are finally shaped. Surface is smoothed and cleaned for cement slurry film and laitance.

Avoid wind, draught and heat exposure from eg. sunlight and underfloor heating during construction and curing time. Underfloor heating can be started slowly after 7-8 days.

After approx. 2 days joints can be cleaned for any hardened laitance using 7120 ceramic cleaner.

Dependent on absorbing capacity of the tiles and room temperature the grouted tile surface can withstand light foot traffic/load after 2-3 hours and maximum loading after 7 days.


Working environment

The product does not contain Portland Cement and is therefore not subject to occupational hygiene measures for cement.
Reference to product safety data sheet.



5 kg bags


Storage and transportation

Transport and store dry. The product keeps technical specification minimum 12 months after production date in unopened packaging. Can be used hereafter; technical properties may, however, change; e.g. setting time may be extended.


Areas of Application

Indoor Areas
Indoor Floor
Indoor Wall
Wet Room
Dry room
Outdoor Areas
Tile Type
Ceramic tile with water absorption under 0,5%
Ceramic tile with water absorption over 0,5%
Natural Stone


1,3-1,4 L

water +

5 kg



Average: 0,5-1,8 kg /m²
Joint Width
2-10 mm
Working Time and Temperature

Working temperature:


Working Time:

Light load: 2 h
Dry to touch: 7 days

Dimensions and packaging

5 kg bag


supercolour excellent DS
Technical Data Sheet
supercolour excellent EC1
EC1 Licence
supercolour excellent
M1 Emission Classification
2536.1 M1
M1 Emission Classification
M1 Emission Classification
M1 Emission Classification
supercolour excellent SDS
Safety Data Sheet
Efflorescence manual

Related products

Mira grout string
grout spacer string
Mira grout float
grout float
A special two-layered grout float for applying mira 3650 multipox into the joints
Mira sponge grey
grey sponge
A special washing sponge for removing mira 3650 multipox epoxy grout haze
mira sponge
soft sponge
Mira 7120 ceramic cleaner 1L (front)
Acidic cleaning agent
7120 ceramic cleaner
Acidic cleaning solution for the removal of calx, rust and cement residue. The thorough cleaner removes grout residue, cement milk, calx and rust from ceramic tiles, natural stone and sanitary ware.

Packaging Details

ImageProductEANCodeX (mm)Y (mm)Z (mm)Neto Weight (kg)Bruto Weight (kg)Best Before (Days)
mira supercolour excellent, black (130), 5 kg5701914104307500E130523015010055.055365
mira supercolour excellent, anthracite (123), 5 kg5701914104253500E123523015010055.055365
mira supercolour excellent, grey (121), 5 kg5701914104208500E121523015010055.055365
mira supercolour excellent, silver (115), 5 kg5701914104154500E115523015010055.055365
mira supercolour excellent, white (100), 5 kg5701914104109500E100523015010055.055365
supercolour excellent