6810 cemplaster

6810 cemplaster

Plaster
EN 998-1 GMP
A moisture proof filler plaster for walls and ceilings, used in dry and wet rooms
Characteristics
Cement-based
Waterproof
Pumpable
Easy to use
Mechanically durable
For level plastering and repair work
Moisture proof

Detailed description

Usage

6810 cemplaster is suitable for use on mineral substrates, such as concrete, lightweight concrete, masonry, lightweight concrete blocks and cement render.

6810 cemplaster is suitable for both repairing and fine smoothing.

6810 cemplaster creates a smooth finishing to the surface.

6810 cemplaster is available in 25 kg paper bags.

 

Product description

Grey, cement based, moisture proof filler plaster for levelling mineral substrates.

 

Application areas

Suitable for filling cracks and holes in walls or ceilings. mira 6810 cemplaster creates a nice finishing on the surface in both dry and wet rooms.

 

Type of substrate

6810 cemplaster is suitable for use on concrete, lightweight concrete, masonry and other similar mineral substrates.

 

Pre-treatment of substrate

The substrate must be dry, coherent, clean of grease, dust and other dirt. Cement milk, loose particles and weak parts must be removed. Clean the substrate with mira 7110 base cleaner, using a pressure washer or other efficient method.

 

Priming

On concrete, use mira 4180 primer diluted in 1-3 parts water, depending on the porosity of the substrate. On non-absorbent substrates, use mira 4140 contact primer. Use a brush or broom to work the primer into the substrate.

 

Application

25 kg powder to be mixed with 6,5 litres of clean water. For the best result, mix a minimum of 2 minutes with a cement mixer or pump, until the mixture is homogenous. Let the mixed mortar sit for 15 minutes and mix again. After that, the mortar is ready to be used.

The pot life of the prepared mix is approximately 4 hours at a temperature of 10-20 ̊C.

The plaster is applied to the substrate with a trowel in a 2-10 mm layer. Excess mortar is removed from the trowel, put back into the bucket, mixed, and used again. The applied layer must not dry too fast and must be moistened with water is necessary.

When applying in multiple layers, the previous layer must be fully dry before the next layer can be applied. After 48 hours, the surface can be painted using alkali resistant paint or covered with wallpaper, ceramic tiles or other similar covering.

 

Working environment

The product contains cement. Working environment rules for cement must be followed.

6810 cemplaster is guaranteed chrome neutralized in minimum 12 months.
Reference to product safety data sheet.

 

Storage and transportation

Transport and store dry. The product keeps technical specification minimum 6 months after production date in unopened packaging. Can be used hereafter; technical properties may, however, change; e.g. setting time may be extended.

cert_ec1_plus
cert_m1

Areas of Application

Indoor Areas
Indoor Wall
Indoor ceiling
Outdoor Areas
Outdoor Wall
Substrate
Concrete
Lightweight concrete block
Plaster
Render
Masonry

Usage

Mixing
6,5 L

water +

25 kg

mixture

Application Instructions

After mixing, let sit for about 15 min and then mix again.

Properties

Coverage
Average: 1,3 kg /m²
Layer Thickness
2-10 mm
Working Time and Temperature

Working temperature:

10-20°C

Working Time:

4
h
Hardening
Further treatment: 48 h
Strength
Compression strength:  N / mm²

Files

6810 cemplaster DS
Technical Data Sheet
6810 cemplaster DoP
Declaration of Performance
6810 cemplaster M1
M1 Emission Classification
2534.1
M1 Emission Classification
6810 cemplaster SDS
Safety Data Sheet

Packaging Details

ImageProductEANCodeX (mm)Y (mm)Z (mm)Neto Weight (kg)Bruto Weight (kg)Best Before (Days)
mira 6810 cemplaster, 25 kg570191468100610014502601002525.11365
6810 cemplaster