6700 cemplan

Self-levelling compound
EN 13813 CT-C25-F5
Self-levelling compound for level layers
Rapidly hardening
Polymer reinforced
Good adhesion
Wear resistant
For levelling cement-based substrates

Detailed description


Cement based, polymer reinforced, floor levelling compound.

6700 cemplan is recommended for levelling of most floor types like concrete, screed, lightweight concrete etc.

6700 cemplan is a dry product that is ready to use after mixing with water.

6700 cemplan is self-levelling and easy to smoothen.

6700 cemplan is supplied in 25 kg bags.


Application areas

For plain levelling in wet as well as dry areas. 6700 cemplan can be applied with hand tools or a mixing pump.


Type of substrate

6700 cemplan can be applied on substrate of concrete, screed and lightweight concrete.

Layer thickness must be 1-45 mm on concrete and floor screed and 5-30 mm on lightweight concrete.


Pre-treatment of substrate

The substrate must have carrying capacity, be stable, coherent and clean of dust, grease and cement laitance. Any cured laitance and weak parts of the substrate must be cut off or ground away. Loose dust to be removed with a vacuum cleaner. Grease, oil etc. to be removed using 7110 base cleaner, high pressure water cleaning or other effective cleaning method.



Absorbent substrates must be primed with 1 part of 4180 primer diluted in 3 parts of water. The primer must be worked well into the substrate with a brush. When more layers are applied, each layer must be primed. Dense substrates with poor adhesion such as ceramic tiles and paint must be primed with mira 4140 contact primer.



25 kg powder to be mixed with 4,75-5,25 litres of clean water. For the best result, mix a minimum of 2 minutes with a cement mixer or pump, until the mixture is homogenous.

The flowability can be tested using the flow test. Place the test tube on a level surface, fill the tube to the top edge with mixed 6700 cemplan, lift the tube so the compound can flow freely. When the compound has flowed completely by its own, the diameter is measured (see technical data).

The floor levelling compound can be applied in approx. 15-20 minutes after mixing at room temperature 10-18°C. The compound should be poured out onto the floor immediately after mixing. 6700 cemplan levels out by itself, but can be smoothened and spread into corners by using the smooth side of a trowel.

Depending on room temperature and air moisture the layer is ready for light foot traffic after approx. 2 hours. Ceramic tiles can be laid after 6-12 hours. In wet rooms waterproofing of the surface with mira 4400 multicoat can be applied after 12-18 hours at the earliest.


Working environment

The product contains cement. Working hygienic rules for cement must be followed.

6700 cemplan is guaranteed chrome neutralized in minimum 12 months.

Reference the product safety data sheet.


Storage and transportation

Transport and store dry. 6700 cemplan keeps technical specification minimum 6 months after production date in unopened packaging. Can be used hereafter, technical properties may however, change; for example, the setting time may be extended.


Areas of Application

Indoor Areas
Indoor Floor
Dry room
Medium deformation
Lightweight concrete
Levelling compound
Suitable Cover Material
Ceramic Tile
Natural stone
Floor board


Average: 1,7 kg /m² /mm
Layer Thickness
1-45 mm
Working Time and Temperature

Working temperature:


Working Time:

Light load: 2 h
Further treatment: 6-12 h
Waterproofing application: 12-18 h
Compression strength: 25 N / mm²
Flexural strength: 5 N / mm²

Dimensions and packaging

25 kg bag


6700 cemplan DS
Technical Data Sheet
6700 cemplan DoP
Declaration of Performance
6700 cemplan EC1
EPD mira self leveling compound and concretes
6700 cemplan SDS
Safety Data Sheet

Related products

Mira 4140 contact primer 10kg (front)
4140 contact primer
A two component contact primer for creating an adhesive layer on non-absorbent substrates before the application of a self levelling compound, repair mortar, waterproofing, tile adhesive or other similar product.
Mira sponge grey
grey sponge
A special washing sponge for removing mira 3650 multipox epoxy grout haze
Mira planstop
Rubberfoam strip. For limiting self-levelling floor compounds from flowing at doorsteps, gullies etc.
Mira level pin
level pin
Ensures right thickness for levelling compounds
mira 7110 base cleaner 1l (front)
Alkaline cleaning agent
7110 base cleaner
A high quality prewash solution for tiles before further treatment. Removes oil, fat and dirt from ceramic tiles and natural stone. Suitable for the cleaning of all surfaces before further treatment or covering.
Mira 4180 primer (front)-01
4180 primer
A primer for porous substrates before the application of a levelling compound, hydroisolation, tile adhesive etc
mira sponge
soft sponge

Packaging Details

ImageProductEANCodeX (mm)Y (mm)Z (mm)Neto Weight (kg)Bruto Weight (kg)Best Before (Days)
mira 6700 cemplan, 25 kg5701914670017506700EE4502601002525.11180