6998 betomix quick

Levelling and repair mortar
EN 13813 CT-C25-F5
Rapidly hardening dry concrete
Rapidly hardening
Polymer reinforced
Moisture resistant
Suitable for use as a floating floor

Detailed description


Cement based, waterproof and frostproof dry concrete (not self- levelling) for casting concrete floors/screeds, repairing concrete surfaces and installing anchors, columns etc.

6998 betomix quick is supplied in 25 kg bag.


Product description

Cement based, polymer reinforced rapidly hardening waterproof and frostproof dry concrete. Low dust.


Application areas

For casting concrete floors/screeds and unbonded and floating screeds, repairs of holes and depressions and reinforcement of anchors, columns etc. in wet and dry areas, indoors and outdoors.


Types of substrates

Use 6998 betomix quick as bonded screed in a 20-80 mm thick layer on concrete substrates. Apply 6998 betomix quick as floating screed (layer thickness 35-80 mm) without a reinforcement mesh on solid substrates with a slip layer or with a reinforcement mesh and a slip layer on substrates like insulation. The slip layer is made of 2 x 0.15 mm PE plastic film.


Pre-treatment of substrate

The substrate must be firm, sound, coherent and free from dust, grease and cement laitance. Any hardened laitance and weak parts of the concrete surface must be cut off or ground away. Loose dust to be removed with vacuum cleaner. Grease, oil etc. to be removed using 7110 base cleaner, high pressure water cleaning or other effective cleaning method.



Priming is usually not necessary.
For bonded screed less than 30 mm thick 6998 betomix quick bonding must always be secured by a slurry bonding coat: 1 part 4180 primer mixed with 2 parts water and added 6998 betomix quick powder to create a mixture with right viscosity.



25 kg 6998 betomix quick powder to be mixed with 1.8-2.2 l clean water to a lump free mass. Small portions can be mixed with a low-speed mixing paddle. Large portions are mixed in a concrete mixer. Ensure that the powder and water are within the recommended working temperature.

The pot life of the mixed product is approximately 40-60 minutes after mixing at room temperature of 10-18°C.

Pour compound onto the floor immediately after mixing and work it throughly into substrate. Level the compound.

All areas above 30-36 m² must be divided into smaller areas with expansion joints across the construction. Any reinforcement mesh/ bars must be cut at the expansion joints.

After 1-1,5 hour the compound starts to set and can be float finished and smoothened.

The surface is ready as finished flooring or for further surface treatment after 3 hours.

The newly cast mortar must be protected against forced drying out during the curing process.


Working environment

The product contains cement. Working hygienic rules for cement must be followed.

6998 betomix quick is guaranteed chrome neutralised for at least 12 months.

Reference the product safety data sheet.


Storage and transportation

Transport and store dry. The product keeps technical specification minimum 6 months after production date in unopened packaging. Can be used afterwards, however, the technical properties may change. For example, the setting time may be extended.


Areas of Application

Indoor Areas
Indoor Floor
Wet Room
Dry room
Outdoor Areas
Outdoor Floor
Levelling compound


1,8-2,2 L

water +

25 kg



Average: 1,9 kg /m² /mm
Layer Thickness
20-80 mm
Working Time and Temperature

Working temperature:


Working Time:

Light load: 3 h
Dry to touch: 6 h
Compression strength: 25 N / mm²
Flexural strength: 6 N / mm²

Dimensions and packaging

25 kg bag


6998 betomix quick DS
Technical Data Sheet
6998 betomix quick DoP
Declaration of Performance
6998 betomix quick EC1
EPD mira self leveling compound and concretes
6998 betomix quick SDS
Safety Data Sheet

Related products

Mira 4140 contact primer 10kg (front)
4140 contact primer
A two component contact primer for creating an adhesive layer on non-absorbent substrates before the application of a self levelling compound, repair mortar, waterproofing, tile adhesive or other similar product.
Mira sponge grey
grey sponge
A special washing sponge for removing mira 3650 multipox epoxy grout haze
mira 7110 base cleaner 1l (front)
Alkaline cleaning agent
7110 base cleaner
A high quality prewash solution for tiles before further treatment. Removes oil, fat and dirt from ceramic tiles and natural stone. Suitable for the cleaning of all surfaces before further treatment or covering.
Mira 4180 primer (front)-01
4180 primer
A primer for porous substrates before the application of a levelling compound, hydroisolation, tile adhesive etc
Mira 4410 vapourstop (+22deg)-01
Vapour barrier primer
4410 vapourstop
Vapour barrier used as a part of the mira waterproofing system on surfaces that with a need for a higher level of water vapour barrier.
mira sponge
soft sponge

Packaging Details

ImageProductEANCodeX (mm)Y (mm)Z (mm)Neto Weight (kg)Bruto Weight (kg)Best Before (Days)
mira 6998 betomix quick, 25 kg57019146952565069980EE4502601002525.11365